How to Jump Start Your Motorcycle with Portable Jump-Starter? – Quickly Revive a Dead Battery

If you ever find yourself in a situation where your motorcycle battery doesn’t work, you will benefit greatly from knowing how to jump-start it easily.

Unfortunately, not everyone knows how to do this, so a lot of people tend to pay a professional to fix the issue rather than trying to fix it themselves first. That is why we’re here to walk you through jump-starting your motorcycle in the easiest way on your own.

It’s very important to know how to perform this action safely and accurately. You don’t want to cause any damage to your motorcycle battery or put yourself in danger. However, if you’re someone who doesn’t already know how to do this, getting lost in a sea of confusing and incomplete info online can be very frustrating.

There is no shortage of info you’ll come across once you start your research, and this process usually takes quite a lot of time and effort.

But worry not because we’re here to make things easier! With that being said, you can forget about struggling and use our step-by-step guide on how to jump-start your motorcycle battery using a portable jump-starter safely and efficiently. Follow our guide below to perform this action like a pro!

A Step-By-Step Guide on Using a Portable Jump-Starter on Your Motorcycle


Figuring out how to use a portable jump starter on your motorcycle doesn’t have to be a nightmare. It’s no secret that this process can seem daunting and scary at first, especially if it’s your first time dealing with such as task, but the truth is there is nothing to worry about. By following our guide below, you’ll be able to get this done in a jiffy! Here’s how:

1. Connect the Positive Clip

The first thing you need to do is connect the red clip, which is the positive one, to the positive terminal of the battery. Make sure you look for the color so that you don’t confuse the positive and negative clips.

2. Connect the Negative Clip

Now that you’ve connected the red clip, it’s time to connect the black one as well. You should connect the negative (black) clip to the metal surface of your motorcycle.

3. Switch the Portable Jump Starter On

jump starter on motorcycle

You will now have to turn the jump starter on. You should also check the battery’s voltage so that you can make sure it’s 12V.

4. Push the Starter

Once you switch the jump starter on, you should push it and keep it there for around 2-3 seconds. In case your motorcycle doesn’t start, you should wait for a couple of minutes to see if it will turn on. The reason why you should wait is that you don’t want to burn out your jump starter.

5. Disconnect the Clips

Once your motorcycle starts working properly, you need to disconnect the clips. First, make sure to disconnect the negative clip (the black one), and then proceed to the positive clip (the red one).

6. Keep the Bike Running

riding motorcycle

Lastly, to make sure your battery is recharged properly, you should wait for around 15-30 minutes. It’s best to wait it out until the battery is fully recharged to avoid encountering any further issues or risking it dying again.

Is Using a Portable Jump-Starter on Your Motorcycle Safe?

If you never used a portable jump starter before, you’re probably curious about how safe it is to use it. The answer is, it’s typically completely safe to use a portable jump starter on your motorcycle. The majority of motorcycles use 12V batteries, and the same goes for these portable jump starters, so there should really be nothing to worry about.

Granted, you should always make sure that you connect the right cables and follow the instructions we provided if you want the best results. If you want to ensure complete safety, you can get a jump starter with reverse polarity and short-circuit protection or other safety features that will provide that added layer of protection.

That way, even if you accidentally connect the wrong cables, your motorcycle won’t suffer the consequences.

What If It Doesn’t Work?

repair motorcycle

Wondering what happens if this process doesn’t work and your motorcycle’s battery keeps dying? Well, in such cases, it’s likely that there is something else wrong with your battery that jump-starting it won’t fix.

You should try the process we described above to get it to work first, but if that doesn’t work, chances are having a professional check it out or replacing the battery with a new one are your only options.

You could also purchase a 12-battery charger, as well as a multimeter. You can use them to keep your motorcycle battery charged but also to check the voltage whenever you need to. You could also use the multimeter to do certain DIY repairs on your motorcycle and your car, so it can prove quite useful.


Learning how to jump-start your motorcycle battery using a portable jump starter may sound challenging, but it doesn’t have to be. The important thing is that you have all the info at your fingertips and know exactly what to do.

This info must be laid out in a user-friendly way to avoid any confusion and mistakes along the way. That is why our step-by-step guide will prove quite handy and help you perform this action quickly and easily.

The best part is that you don’t have to be a professional to successfully jump-start your motorcycle using our guide! We made sure all the info is laid out in layman’s terms, so you can gather the necessary equipment and solve the problem in record time and with minimum effort! Just make sure that you follow the guide carefully and connect the right cables, and you’re golden.